Mode Settings; Group Power / Fec Settings - Walimex Pro W1 TTL Gebrauchsanleitung

7.4 Mode settings

1. Short press the <MODE> Button, and the
mode of the current group will change.
2. To NON-GR grouping mode, all the
groups' modes will be changed simulta-
neously by the order of TTL/M/Multi, in
accordance with Ratio flash mode. To GR
grouping mode, only the current group's
mode will be changed by the order of
TTL/M/--.

7.5 Group POWER / FEC settings

1. Short press the <GR> Button and the
selected group will blink. Click to choose
downwardly and double-click to choose
upwardly.
2. Turn the Select Dial to change the power
or flash exposure compensation settings.
When the current group is in the M mode,
the power output value is changeable from
1/1 full power to Min. power in 0.3 stop
increments. When the current group is in
the TTL mode, the FEC amount is chan-
geable from -3 to 3 in 0.3 stop increments.
When the current group is in the -- mode (flash off), the amounts will not change.
3. Short press the <CH/OK> Button again to confirm the setting.
701_walimex pro Funkauslöser W1 TTL T-C_BDA.indd 34
Downloaded from www.Manualslib.com manuals search engine
CH
Gr
CH
Gr
34
3/12/2018 1:15:16 PM