General Information - Hilti DCG 230‑D Bedienungsanleitung

ORIGINAL OPERATING INSTRUCTIONS
DCG 230-D / DAG 230-D angle grinder
It is essential that the operating instructions
en
are read before the power tool is operated for
the first time.
Always keep these operating instructions to-
gether with the power tool.
Ensure that the operating instructions are
with the power tool when it is given to other
persons.
Contents

1 General information

2 Description
3 Consumables
4 Technical data
5 Safety instructions
6 Before use
7 Operation
8 Care and maintenance
9 Troubleshooting
10 Disposal
11 Manufacturer's warranty - tools
12 EC declaration of conformity (original)
1 General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
16
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation "the
power tool" always refers to the DCG 230-D or
DAG 230-D angle grinder.
Parts, operating controls and indicators 1
Clamping nut
@
"Kwik-Lock" clamping nut (optional)
;
Cutting disc
Page
=
Clamping flange
16
%
Keying lug
17
&
Guard
19
(
Spindle
20
)
Adjusting screw
21
+
Clamping lever
25
§
Steadying rib
26
/
Threaded bushing for grip
28
:
Drive spindle lockbutton
28
·
Release lever (for pivotable grip)
29
$
Side handle
29
£
30 On / off switch (hold to run)
|
Wrench
¡
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Warning:
electricity