Attaching / Detaching Sanding Sheets; Turn The Backing Plate In 60° Steps; Advice On Use; Maintenance And Cleaning - Parkside PDS 290 B2 Bedienungs- Und Sicherheitshinweise

Preparing for use / Maintenance and cleaning / Service centre
Removal:
P ull the hose of the dust extraction device off
the adapter for external vacuum extraction
Turn anticlockwise to unlock the dust extraction
port
4
P ull off the adapter for external vacuum extrac-
tion
7
Attaching / detaching
Q
sanding sheets
of the socket before doing any work on the device.
Attaching:
S anding sheets are attached to the backing plate
by means of the hook and pile fastening.
6
Detaching:
S imply pull the sanding sheet off the backing
plate
6
Materials:
Wood (sanding sheets included), paint*, stone*
*depending on the sanding sheet
Turn the backing plate
Q
in 60° steps
of the socket before doing any work on the device.
T urn the backing plate
in 60° steps until it engages in the desired
position (see Fig. C).
Sanding output and surfaces:
The shape of the delta sander allows you to sand
workpieces even in their difficult to access places,
corners and edges (see Fig. D).
Sanding performance and surface quality depend
on the grade of sanding sheet and the oscillation
speed setting.
A lways use sanding sheets with grades that
are suitable for the particular surface you are
sanding. The speed selected should also be
appropriate to the task undertaken.
10 GB/IE
Downloaded from www.Manualslib.com
.
(with the reducer piece
8
Always pull the mains plug is out
(see Fig. B).
Always pull the mains plug out
of the delta sander
6
manuals search engine

Advice on use

Q
. S witch the device on before placing it against
7
the workpiece.
A pply light sanding pressure only.
A dvance the device at an even rate.
if used). C hange sanding sheets at the appropriate time.
D o not work on different types of material using
the same sanding sheet (e.g. wood and then
metal). To achieve the best sanding results you
should use unworn, undamaged sanding sheets.
C lean the sanding sheet from time to time with
a vacuum cleaner.

Maintenance and cleaning

Q
of the socket before doing any work on the device.
The delta sander is maintenance-free.
C lean the device frequently. This should be done
immediately after you have finished using it.
F or cleaning the housing use a dry cloth only.
R emove any adhering sanding dust with a nar-
row paint brush.
N ever any kind of sharp object or petrol, solvents
or cleaning agents that might attack plastic. Do
not allow any liquids to enter the inside of the
device.
A lways keep the ventilation slots

Service centre

Q
paired only by qualified specialist
personnel using original manufacturer
parts only. This will ensure that your device
remains safe to use.
lead needs to be replaced, always have
the replacement carried out by the
manufacturer or its service centre. This
will ensure that your device remains safe to use.
Note: Spare parts not listed (e.g. carbon brushes,
switches) can be ordered through our call centre.
Always pull the mains plug out
clear.
5
Have your device re-
If the plug or mains