Vacuum Dust Extraction; Adapter For External Vacuum Extraction (With Reducer Piece); Attaching / Detaching Sanding Sheets; Turn The Backing Plate In 60° Steps - Parkside PDS 290 A1 Montage-, Bedienungs- Und Sicherheitshinweise, Originalbetriebsanleitung, Originalbetriebsanleitung

Preparing for use
Switching off the device:
Move the ON / OFF switch
setting "0".
Selecting the oscillation speed:
You can preselect the oscillation speed you require
using the oscillation speed setting wheel
can also change the speed whilst you are working.
The way to determine the optimum oscillation
speed for your task is to carry out a practical test.
Setting 1 = lowest oscillation speed /
Setting max. = highest oscillation speed
©

Vacuum dust extraction

WARNING!
the danger of fire when working with electrical
devices that have a dust box or can be connected
to a vacuum cleaner. Under certain conditions the
wood dust in the dust extraction bag (or in the vac-
uum's dust bag) may ignite, e.g. as a result of flying
sparks generated when abrading metals or metal
objects left in wood. This can happen particularly if
the wood dust is mixed with paint residue or other
chemicals and the abraded particles are hot from
prolonged abrasion. Therefore you must empty the
device's dust collection box and the vacuum clean-
er's dust bag before taking a break or stopping
work and always avoid overheating of the abrad-
ed particles and the device.
Wear a dust mask!
WARNING!
out of the socket before doing any work on the
device.
©
Adapter for external vacuum
extraction (with reducer piece)
Connection:
Push the adapter for external vacuum extrac-
tion
7
10 GB/IE
Downloaded from www.Manualslib.com
1 backwards into
DANGER OF FIRE! There is
Always pull the mains plug is
into the dust extraction spout
manuals search engine
When doing this observe the guide markings
on the device and adapter. Turn the dust
extraction spout to lock in place.
If it is necessary to use the reducer piece
push the reducer piece into the adapter for
external vacuum extraction
. You Push the hose of a suitable dust extraction de
2
vice approved for that purpose (e.g. a work-
shop vacuum cleaner) on to the adapter for
external vacuum extraction
piece
8
Removal:
Pull the hose of the dust extraction device off
the adapter for external vacuum extraction
Pull off the adapter for external vacuum extrac-
tion
7
©
Attaching / detaching
sanding sheets
WARNING!
of the socket before doing any work on the device.
Attaching:
Sanding sheets are attached to the backing plate
by means of the hook and pile fastening.
6
Detaching:
Simply pull the sanding sheet off the backing
plate
6
©
Turn the backing plate
in 60° steps
WARNING!
of the socket before doing any work on the device.
Turn the backing plate
in 60° steps until it engages in the desired
position (see Fig. C).
Sanding and surfaces:
The shape of the delta sander allows you to sand
workpieces even in their difficult to access places,
. corners and edges (see Fig. D).
4
.
7
or the reducer
7
.
(with the reducer piece
8
Always pull the mains plug is out
(see Fig. B).
Always pull the mains plug out
of the delta sander
6
,
8
7 .
if used).