IE
NI
Levels of noise and vibration were deter-
mined according to the standards and re-
gulations in the declaration of conformity.
The vibration emission value has been
measured according to a standardised
testing method and may be used for com-
parison with another device.
The indicated vibration emission value may
also be used for an introductory assess-
ment of the exposure.
Warning: The vibration emission
value whilst actually using the de-
vice may vary from the given values
regardless of the type and way in
which the device is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. All parts of the ope-
rating cycle have to be considered
while doing so (for example, times
when the power tool is switched off
and times when it is switched on
but running without any load).
Safety information
This section describes the basic safety rules
when working with the device.
Signs/symbols
Symbols on the device
Caution!
Read the instruction manual
8
Risk of injury due to ejected parts;
Keep persons in the vicinity away
from the device
Risk of injury due to sharp blade!
Keep away from feet and hands
Caution - Toxic vapours!
Do not operate device in closed
rooms
Caution - Petrol is flammable!
Do not smoke and keep away from
heat sources
Do not expose the device to moisture.
Never operate the device in rain.
Attention! The lawnmower blade
continues to move
Switch off the engine when you
leave the device.
Never mow if there are people,
particularly children or animals,
nearby.
Switch off the engine before
maintenance work and unplug the
spark plug connector
Caution - Hot surfaces!
Risk of burn injury
Wear eye and hearing protection
The sound power level L
L
WA
cated in dB
dB
Danger! Keep hands and feet
at a safe distance
is indi-
WA