Safety Precautions; Pictorial Diagrams On The Equipment - Parkside PRM 1300 A1 Originalbetriebsanleitung

GB IE NI
The stated vibration emission value was
measured in accordance with a standard te-
sting procedure and may be used to compare
one power tool to another.
The stated vibration emission value may also
be used for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).
The noise and vibration values have
been determined in accordance with the
standards and regulations specified in the
declaration of conformity.

Safety precautions

This section covers the basic safety
regulations when working with the
electric lawnmower.
Pictorial Diagrams on the
Equipment
Caution!
Read the operating instruc-
tions carefully.
Do not expose the equipment
to the damp. Do not work in
the rain and do not cut wet
grass.
6
CY
Risk of injury from parts be-
ing thrown up.
Keep nearby people away
from the mower.
Caution – sharp cutting
blade! Keep feet and hands
away. Risk of injury!
Switch off the motor and
disconnect the plug before
adjustment or repair work
or if the power cable is
caught or damaged.
Danger of damaged power
cable.
Keep the power cable away
from the cutting blade!
Caution! The lawnmower
blade continues to run after
switching off.
Wear eye and ear protec-
tion.
Noise level specification
LWA in dB.
Protection class II
(Double insulation)
Do not dispose of electrical
equipment in domestic waste.
320
Cutting circle
Starting - press the re-
lease button & pull the
start lever
- 20
Scale cutting height
- 40
- 60