Dismounting And Disposal - WIKA PG43SA-S Betriebsanleitung

7. Maintenance ... / 8. Dismounting and disposal
7.2 Cleaning
Suitable for 'in place' SIP and CIP cleaning processes, if appropriate
media are used and the permissible specifications are complied with.
EN
When cleaning from outside ("wash down"), observe the permissible
temperature and ingress protection.
Vent hole with model PG43SA-S
In order to avoid any change in pressure within the case, the model
PG43SA-S features a vent hole at the case bottom on the rear side.
In case of condensation formation within the case or ingress of low
water quantities from outside, this can be drained through the vent
hole.

8. Dismounting and disposal

8.1 Dismounting
Only disconnect the measuring instrument once the system has
been depressurised!
8.2 Disposal
Incorrect disposal can put the environment at risk.
Dispose of instrument components and packaging materials in
an environmentally compatible way and in accordance with the
country-specific waste disposal regulations.
12
Downloaded from www.Manualslib.com
WARNING!
Physical injuries and damage to property and the
environment through residual media
Residual media in the pressure measuring instrument
can result in a risk to persons, the environment and
equipment.
▶
Wash or clean the dismounted instrument, in order to
protect persons and the environment from exposure
to residual media.
WIKA operating instructions pressure gauge, PG43SA-S, PG43SA-C
manuals search engine