2
2.1
This operating instructions describe installation and operation of products with
article numbers
VSM72MV,
VSM72MVCF.
The article number can be found on the product's type label. Technical
modifications are reserved without prior notification.
2.2
Included in the delivery consignment are:
Available Accessories:
2.3
The VSM72 vacuum transducer is measuring total pressure in the range of
1000 - 5x10
control units or to customer related power supply and evaluation units in
compliance with pin assignment. The analog output signal 1,8V – 8,6V has a
logarithmic dependence on pressure over the whole range.
In addition the device has a serial RS485 interface for digital data transfer (see
chapter 4.2).
The transducer is equipped with a metal-sealed combination sensor type Pirani /
Cold Cathode (inverted magnetron) and temperature compensated. It can be
mounted to suitable flange connectors.
Downloaded from
www.Manualslib.com
Vacuum Transducer VSM72
For Orientation
Delivery Content
-
Transducer VSM72
Protective flange cover
-
-
Operating instructions
-
Measurement cable 2m for connection to VD9 display unit, W1506002
Measurement cable 6m for connection to VD9 display unit, W1506006
-
Counterplug 15pole, XB1500002
-
Product Description
-9
mbar. The transducer can be connected to Thyracont display and
manuals search engine
27