Fernstart (Remote Start) - LG F11WM17VT2 Bedienungsanleitung

Wi-Fi( )
Press and hold the Wi-Fi button for 3 seconds. When
Wi-Fi is turned on, the Wi-Fi icon (
panel is lit.

Fernstart (Remote Start)

Use a smart phone to control your appliance remotely.
You can also monitor your cycle operation so you know
how much time is left in the cycle.
NOTE
• You must first connect to a gateway and register
your appliance in order to use the Remote Start
function.
To use Remote Start:
1
Press the Ein/Aus button.
2
Put the laundry in the drum.
3
Press and hold Fernstart button for 3 seconds to
enable Remote Start function.
4
Start a cycle from the LG SmartThinQ application
on your smart phone.
NOTE
• If you do not start your appliance, it will wait to
start a cycle until you turn off your appliance
from the application or disable the Remote Start
function.
• When Remote Start is turned on, the door is
automatically locked.
To disable Remote Start:
When the Remote Start is activated, press and hold
Fernstart button for 3 seconds.
) on the control
Download/Neu (Download Cycle)
The Download Cycle features of this appliance allow
you to download new and special cycles that are not
included in the appliance's basic cycles.
Appliances that have been successfully registered
can download a variety of specialty cycles specific to
the appliance. Only one cycle can be stored on the
appliance at a time.
Once Cycle Download is completed in the washer, the
product keeps the downloaded cycle until you change it
to a new downloaded cycle.
NOTE
• You can download cycles after registering the
product and configuring the Wi-Fi connection.
• You can download a desired cycle through the 'LG
SmartThinQ' app. For more information on each
cycle, refer to the 'LG SmartThinQ' app.
• Depending on the type of washer purchased,
different cycles will be available.
• The downloaded cycles may be different
depending on the updated version of the 'LG
SmartThinQ' app.
29