Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Symptoms
42
Reason
Door is not closed properly.
Door sensor has malfunctioned.
Water overfills due to the faulty
water valve.
Water level sensor has
malfunctioned.
Over load in motor.
Water leaks.
The washer experienced a power
failure.
Control Error
Is Inlet/outlet hose or drainage
pump frozen?
Solution
• Close the door completely.
If '
,
,
,
' is not released,
call for service.
• Unplug the power plug and call for
service.
• Close the water tap.
• Unplug the power plug.
• Call for service.
• Close the water tap.
• Unplug the power plug.
• Call for service.
• Allow the washing machine to stand for
30 minutes to allow the motor to cool,
then restart the cycle.
• Call for service.
• Restart the cycle.
• Unplug the power plug and call for
service.
• Supply warm water into the tub and
unfreeze outlet hose and drainage pump.
Wet a towel in warm water and apply to
inlet hose.
Werbung
Inhaltsverzeichnis
