Connect Satellite Antenna; Connect Tv Set; Connect Power Supply - Smart Electronic CX20 Schnellstartanleitung

1.2 Connect Satellite Antenna

 Connect the antenna cable to the receiver connection LNB IN.
Further receivers can be connected at the connection LNB OUT. The
signal is looped through from input LNB IN.

1.3 Connect TV Set

As stated in the connection scheme, the smart CX20 offers various possi-
bilities to connect TV set and receiver. The possibilities applicable to you
depend on the connection possibilities of your TV set.
The TV set provides of
an HDMI connection:
 Connect TV set and
receiver by using an
HDMI cable.
 If your TV set offers both possibilities then always


1.4 Connect Power Supply

 When all devices are properly connected to the receiver you can
connect the mains plug to the power outlet.
smart CX20
The TV set does not provide of an HDMI connec-
tion: select one of the below possibilities.
 Connect TV set and
receiver by using a
SCART cable.
choose connection via HDMI cable.
This ensures best possible audio and video quality
with digital signals.
Table of Contents
 Connect the TV set
and the receiver by
using a
1-pole RCA cable
and a
2-pole RCA cable
(stereo).
17