Cup-Warmer; Delivery Of The Coffee - LaCimbali M39Dosatron Gebrauch Und Installation

23
CAUTION: do not put any cloth on the cup-
warmer.
The machines have a cup warmer tray (23) for stocking and
pre-heating the cups.
Unhook filter holder and empty the coffee grounds of the
previous coffee in the dregs drawer.
Fill the filter with one dose of ground coffee in the case of the
1-cup filterholder with conical filter or with two doses of ground
coffee in the case of a 2-cup filterholder with cylindrical filter.
Uniformly press the ground coffee in the filter holder by means
of the pressing disc of the grinder.
Clean the filter rim in order to eliminate the eventual ground
coffee.
Hook filterholder to the group and put one or two cups
underneath of the delivery spouts of filter holder.
Push the button corresponding to the wanted coffee.
The delivery can be interrupted in whichever moment by
means of the push button STOP.
10. Cup-Warmer (where contemplated)
22

11. Delivery of the coffee

Only place cups and glasses used with the coffee machine
on the cup tray. No other objects must be placed on the
tray.
Thoroughly drain the cups before placing them on the tray.
To activate the resistance of the cup warmer tray (23) press
button (22); to change the cup-warmer power, press the (22)
key a number of times.
- All LEDS on = full power
- All LEDS off = OFF
To desactivated the heating of tray (23) press more times the
key (22) until all the leds are off.
N.B. The heating of the cup warmer tray (23) is deactivated
during the automatic switch off phase.
The condition in effect at the time when the machine was
switched off will be restored the next time the machine auto-
matically switches on.
43