Overview Of The Motherboard And Connection Possibilities - Kingspan EasyConnect 20A Technische Information Und Bedienungsanleitung

SHE Compact control panel EasyConnect 20A
4

Overview of the Motherboard and Connection Possibilities

2 3
26
1 Mains connection 230 V AC (L, N, PE), maximum cable cross-section 2.5 mm² (solid 4 mm²).
2 Drive line 1 (channel 1): Connection of 24 V DC drives with pole reversing, load or limit position shutdown. Maximum
current output 16 A or 20 A with drive lines 1+2 together (ED 30). Maximum cable cross-section 6 mm².
3 Drive line 2 (channel 2): Connection of 24 V DC drives with pole reversing, load or limit position shutdown. Maximum
current output 16 A or 20 A with drive lines 1+2 together (ED 30). Maximum cable cross-section 6 mm².
4 Separate voltage output 27 V DC / 4 A (available for 10 s), maximum cable cross-section 2.5 mm².
5 27 V DC / 4 - 20 mA analog interface input (in preparation)
6 3 x digital high / low signals (in preparation)
7
8
9 2 x automatic detector inputs (channels 1 and 2), max. 20 detectors per channel
10 2 x SHE manual call point inputs (channels 1 and 2), max. 10 call points per channel
11 2 x 24 V ventilation push button inputs (channels 1 and 2)
12 External reset button input (reset SHE trip and reset automatic detectors)
13 Input for connection of wind/rain sensors Type WRM/2 24V or rain sensors Type RM/2 24V
14 2 x 7-segment display for display of status and error codes
15 Internal reset button on the motherboard (reset SHE and FAS trip); if the button is held depressed, the software
version is displayed on the 2 x 7-segment display.
16
17
18
19 Service port interface (RJ 12 jack)
20 Mains fuse F1, 10 A, safety fuse
36
4 5
6
23
22
24
25
8 9
10
7
14
15
21
wind/rain signal (3)
only on version with auxiliary communication circuit board)
only on version with auxiliary communication circuit board)
11
12
13
27 28
29
18
17
16
19
1
20
01/13424999424