Turning Pc Reception On; Com-Redirector - Ricoh WinStyler T180 Bedienungsanleitung

PC-FAXING

Turning PC Reception on

In order to receive messages with your PC, you need to turn this feature on.
Note
If PC reception mode is turned off, incoming fax messages are received by the
fax machine hardware and not uploaded to the PC.
If your PC is turned off, you can not receive any fax messages.
A
On the fax machine operation panel, press the { { { { Function} } } } key and enter { { { { 6} } } }
{ { { { 2} } } } { { { { 2} } } } { { { { 2} } } } { { { { 2} } } } { { { { 6} } } } { { { { 2} } } } on the numeric keypad.
INITIAL MODE Y/NEXTi
62 SELECT FUNCTION
B
Press the { { { { Yes} } } } key.
SELECT LINE
C
Press the V V V V key until the display following appears.
PC RECEPTION ON/OFF
D
Press the { { { { Yes} } } } key.
E
Use the W W W W or V V V V key to turn PC Reception on, then press the { { { { Yes} } } } key.
PC RECEPTION
iON
F
Press the { { { { Function} } } } key to return to standby mode.

COM-Redirector

COM-Redirector is a software that redirects data from your PC's serial port to a
parallel port for use with your PC Fax package. To set the COM port, refer the
online Help.
Note
If a free port is available, it will be selected automatically.
Using port number 5 and above may cause difficulties with some 16-bit fax
applications.
18
Y/NEXTi
Y/NEXTi
Y/hi
OFF