Ryobi ZTR480ex Übersetzung Der Originalanleitung Seite 4

and balance at all times. This enables
better control of the power in unexpected
situations.
Dress properly. Do not wear loose
caught in moving parts.
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of
dust collection can reduce dust–related
hazards.
Do not let familiarity gained from frequent
use of tools allow you to become
complacent and
principles. A careless action can cause
POWER TOOL USE AND CARE
Do not force the power tool. Use the
correct power tool for your application.
better and safer at the rate for which it was
designed.
Do not use the power tool if the switch
does not turn it on and off. Any power
tool that cannot be controlled with the
switch is dangerous and must be repaired.
Disconnect the plug from the power
source and/or the battery pack, if
detachable, from the power tool before
accessories or storing power tools. Such
preventive safety measures reduce the risk
of starting the power tool accidentally.
Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
Maintain power tools and accessories.
Check for misalignment or binding of
any other condition that may affect the
power tool's operation. If damaged,
use. Many accidents are caused by poorly
maintained power tools.
2 | English
ignore tool safety
Keep cutting tools sharp and clean.
Properly maintained cutting tools with
sharp cutting edges are less likely to bind
and are easier to control.
Use the power tool, accessories and
tool bits, etc. in accordance with these
instructions, taking into account the
working conditions and the work to
be performed. Use of the power tool for
operations different from those intended
could result in a hazardous situation.
Keep handles and grasping surfaces
dry, clean, and free from oil and grease.
Slippery handles and grasping surfaces do
not allow for safe handling and control of
the tool in unexpected situations.
BATTERY TOOL USE AND CARE
Recharge only
specified by the manufacturer. A charger
that is suitable for one type of battery pack
may create a risk of fire when used with
another battery pack.
Use power tools only with specifically
designated battery packs. Use of any
other battery packs may create a risk of
When battery pack is not in use, keep
paper clips, coins, keys, nails, screws
make a connection from one terminal
to another. Shorting the battery terminals
together may cause burns or a fire.
If contact accidentally occurs, flush with
water. If liquid contacts eyes, additionally
battery may cause irritation or burns.
Do not use a battery pack or tool that
is damaged or modified. Damaged
or modified batteries
unpredictable behaviour resulting in fire,
Do not expose a battery pack or tool to
to fire or temperature above 130°C may
cause explosion.
Follow all charging instructions and
do not charge the battery pack or tool
with the charger
may exhibit
Exposure