Additional Handsets And Base Stations; Adding A New Handset; Removing A Handset - Topcom BUTLER 5710 Bedienungsanleitung

9

Additional handsets and base stations

You can subscribe up to 4 handsets on a base. Eacht handset can register up to 4 base stations and
the user can select the base he wants to use.
9.1
To put the base into regsitration mode:
On the handset:
4 5 6
g h i j k l m n o
9.2
This procedure needs to be carried out on a different handset then the one you want to remove.
4 5 6
g h i j k l m n o
4 5 6
g h i j k l m n o
Downloaded from www.Manualslib.com
4 Select "Start" to start the stopwatch.
5 Select "Stop" to stop the stopwatch.
Select "Start" again to restart.
Select "Reset" to reset the counter.
6 Return to standby.

Adding a new handset

Only needed when you have deregistered a handset or when you bought a new one.
1 Press and hold the paging key on the base.
The LED on the base will start to blink on the base for 90 seconds. During
that time, the base is ready to register.
1 Enter the menu.
2 Select "Handset" and confirm.
3 Select "Registration" and confirm.
4 Select "Register" and confirm.
5 Select the number of the base to be associated with the handset (1-4) and
confirm.
6 Enter the system PIN (0000 by default) and confirm.
7 Return to standby.

Removing a handset

1 Enter the menu.
2 Select "Handset" and confirm.
3 Select "Registration" and confirm.
4 Select "De-Register" and confirm.
5 Enter the system PIN (0000 by default) and confirm.
6 Enter the handset number that needs to be removed and confirm.
7 Return to standby.
manuals search engine
Additional handsets and base stations
16