Auto Answer; Setting The Dialling Mode; Handset Name - Topcom BUTLER E300 Gebrauchsanweisung

5.12 Handset confirmation tones
During successfull or unsuccessfull operation the handset will beep. This beep can be
activated/deactivated:
Press Menu button
Use the Up
button and select ON or OFF and confirm with
5.13 Key lock
When the keypad is locked, pressing any key will have no effect during standby (except
holding the
Press and hold the
and hold the
When there is an incoming call, you can still answer the call by pressing the OFF-hook button
. During the call, the keypad functions as normal. When the call is ended, the keypad
will be locked again.

5.14 Auto answer

Auto answer enables you to answer an incoming call by simply picking up the handset from
the charging cradle. You do not need to press a key to answer the call.
Press Menu button
Use the Up
press

5.15 Setting the dialling mode

There are two types of dialling mode:
DTMF/Tone dialling (the most common) (default)
Pulse dialling (for older installations)
To change the mode of dialling:
Press Menu button
Use the Up
you want with the Up

5.16 Handset name

You can change the name that appears on the sceen (max. 10 characters) during idle stage:
Press Menu button
Use the Up
name is shown
new name
Topcom Butler ME300/Twin/Triple/Quattro
Downloaded from www.Manualslib.com
Use the Down
or Down button and select 'Tones'
key).
key appears on the display and the keypad is locked
key again to un-lock the keypad.
Use the Down
or Down button and select 'Autoanswer'
.
Use the Down
or Down button and select 'Dial Mode'
or Down
Use the Down
or Down button and select 'Handset Name'
Delete the character by the Mute
Press the Menu/OK button
manuals search engine
Topcom Butler E300/Twin/Triple/Quattro
button to scroll to 'Sound' and press
.
button to scroll to 'Settings' and press
button to scroll to 'Settings' and press
key and select .
button to scroll to 'Display' and press
-key
to confirm.
Use the Up or Down
Select ON or OFF and
Select 'Pulse' or 'TONE'
The currect handset
Use the keypad to enter the
Press
7