Sony PXW-FS7M2 Vor Verwendung Dieses Geräts Seite 21

Input/Output Section
Inputs
INPUT 1/2:
XLR type, 3-pin, female
LINE / MIC / MIC+48V switchable
MIC: Reference −40, −50, −60 dBu
Outputs
SDI OUT 1/2:
BNC type, 0.8 Vp-p, unbalanced
(3G HD/1.5G HD output)
SMPTE ST424 Level A/B, SMPTE
ST425 Level A/B, SMPTE ST292-1
standard compliant
4-channel audio
Headphones (stereo mini jack):
−16 dBu (reference level output,
maximum monitor volume, 16 Ω load)
HDMI: Type A, 19-pin
Other
DC IN: EIAJ compliant, 11 V to 16.5 V DC
Extension unit connector:
Dedicated (144-pin)
Multi-interface shoe:
Dedicated (21-pin)
REMOTE:
Φ2.5 3-pole sub-mini type
USB: 2.0 standard compliant, type AB mini for
mass storage (1)
Type A for W-LAN connection (1)
VF: Dedicated (40-pin)
Display Section
LCD monitor
Screen size
8.8 cm (3.5 inch) diagonal
Aspect ratio
16:9
Number of pixels
960 (H) × 540 (V)
Media Slot Section
XQD card slots for video recording (2)
UTILITY SD card slot (1)
Supplied Accessories
Viewfinder (including eyepiece, eyecup, rod,
clamp)
Viewfinder hood (1)
Round-shaped clamp spacer (2)
Grip remote control
USB wireless LAN module (IFU-WLM3)
Infrared remote control (RMT-845)
AC Adapter/Charger
Battery pack (BP-U30)
Maximum voltage: 16.4 V DC
Nominal voltage: 14.4 V DC
Capacity: 28 Wh
Power cord (1)
Mini USB cable (1)
Option mounting bracket (1)
Body cap (1)
Handle connector protective cap (including two
M2 screws) (1)
USB wireless LAN module cap (2)
W-LAN connector cover spare (1)
Extension unit connector cover spare (1)
Accessory shoe kit (accessory shoe (1), shoe plate
(1), screws (4))
Tape measure hook (1)
Before Using This Unit (1)
Operating Instructions (CD-ROM) (1)
Design and specifications are subject to change
without notice.
• SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND RESULTING
FROM A FAILURE TO IMPLEMENT
PROPER SECURITY MEASURES ON
TRANSMISSION DEVICES,
UNAVOIDABLE DATA LEAKS
RESULTING FROM TRANSMISSION
SPECIFICATIONS, OR SECURITY
PROBLEMS OF ANY KIND.
• Communication content may be unknowingly
intercepted by unauthorized third parties in the
vicinity of the signals. When using wireless
LAN communication, implement security
measures properly to protect the
communication content.
21
Specifications