Star TSP552 Bedienungsanleitung Seite 24

(4) Position the roll paper straight and close the printer cover gently.
Note 1: Make sure that the paper is positioned straight. If the printer cover
Note 2: Lock the printer cover by pressing on the center of the cover. If any
(5) Set the power switch to on to turn on power to the printer. Make sure that the
ERROR LED is not lit.
Note: While the ERROR LED is lit, the printer will not accept any commands
Downloaded from www.Manualslib.com
is closed with the paper skewed, a paper jam may result.
part of the cover other than the center is pressed, the cover may not
be locked properly. This may sometimes disable printing.
such as the print command, so make sure that the printer cover is locked
properly.
manuals search engine
– 20 –