○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Specifications
Continuous Power Output
(20-20 kHz, < 0.03%, 8 ohms)
Total Harmonic Distortion (20Hz-20kHz, 8 ohms)
Intermodulation Distortion (60 Hz : 7 kHz, 4:1)
Frequency Response ( ±0.5)
Damping Factor (20-20,000 Hz, 8 ohms)
Speaker Impedance
Signal to Noise Ratio (IHF A network)
Input Impedance/Sensitivity
Power Requirements
Power Consumption
Dimensions (W x H x D)
Weight (net)
All specifications are accurate at the time of printing.
Rotel reserves the right to make improvements without notice.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Fiche technique
Puissance de sortie en continu
(20 Hz à 20 kHz, 0,03 %, 8 ohms)
Distorsion harmonique totale (20 Hz-20 kHz, 8 ohms) < 0.03 %
Distorsion d'intermodulation (60 Hz : 7 kHz, 4:1)
Réponse en fréquence ( ± 0.5 dB)
Facteur d'amortissement (20-20,000 Hz, 8 ohms)
Impédance des enceintes
Rapport signal/bruit (IHF A network)
Impédance d'entrée/Sensibilité
Alimentation
Consommation
Dimensions (L, H, P)
Poids (net)
Toutes les spécifications de cet appareil étaient exactes au moment de
l'impression de ce guide. Rotel se réserve le droit de les modifier sans
préavis.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Características Técnicas
Potencia Continua de Salida
(20-20.000 Hz, THD menor del < 0'03%, 8 ohmios)
Distortión Armónica Total (20-20.000 Hz, 8 ohmios)
Distortión por Intermodulación (60 Hz : 7 kHz, 4:1)
Respuesta en Frecuencia ( ±0'5)
Factor de Amortiguamiento (20-20.000 Hz, 8 ohmios)
Impedancia de las Caja Acústicas (modo Normal)
Relación Señal/Ruido (norma IHF/ ponderación A)
Downloaded from
www.Manualslib.com
100 watts/ch
< 0.03%
< 0.03%
10Hz-80kHz
260
4 ohms minimum
115 dB
27 k Ohms/1.0 volt
115 Volts, 60 Hz or
230 Volts, 50 Hz
800 Watts
440 x 139 x 396 mm
17
x 5
3/8"
15.5 kg, 34.1 lb.
100 watts par canal
< 0.03 %
10 Hz à 80 kHz
260
4 ohms minimum
115 dB
27 kohms/1.0 volt
115 Volts, 60 Hz ou
230 Volts, 50 Hz
800 Watts
440 x 139 x 396 mm
17
x 5
3/8"
15.5 kg / 34.1 lb.
100 vatios/canal
< 0'03%
< 0'03%
10-80.000 Hz
260
mínima de 4 ohmios
115 dB
manuals search engine
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Technische Daten
Dauerausgangsleistung
(20 - 20.000 Hz, < 0,03%, 8 Ohm)
Gesamtklirrfaktor (20 - 20.000 Hz, 8 Ohm)
Intermodulationsverzerrung (60 Hz : 7 kHz, 4:1)
Frequenzgang ( ±0,5)
Dämpfungsfaktor (20 - 20.000 Hz, 8 Ohm)
Lautsprecherimpedanz
Geräuschspannungsabstand (IHF A)
Eingangsimpedanz/-empfindlichkeit
Spannungsversorgung
Max. Leistungsaufnahme
Abmessungen (B x H x T)
Nettogewicht
x 15
"
1/2"
5/8
Diese Bedienungsanleitung entspricht dem technischen Stand bei
Drucklegung. Änderungen in Technik und Ausstattung vorbehalten.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Caratteristiche
Potenza di uscita continua (20-20kHz, < 0.03%, 8Ω) 100 Watt per canale
Distorsione armonica totale (20-20kHz, 8 Ω)
Distorsione d'intermodulazione (60 Hz, 7kHz, 4:1)
Risposta in frequenza (±0.5 dB)
Fattore di smorzamento (8 ohm 20 - 20kHz)
Impedenza altoparlanti
Rapporto S/N (IHF A network)
Impedenza d'ingresso/Sensibilità
Alimentazione
Assorbimento
Dimensioni (LxAxP)
Peso (netto)
Tutte le caratteristiche sono corrette al momento della stampa. Rotel si
riserva il dirito di apportare miglioramenti senza darne preavviso.
x 15
"
1/2"
5/8
Sensibilidad/Impedancia de Entrada
Alimentación
Consumo
Dimensiones (An x Al x P)
Peso Neto
Todas estas especificaciones son correctas en el momento de imprimir el
presente manual de instrucciones. Rotel se reserva el derecho a realizar
modificaciones en las mismas sin aviso previo.
RB-985 MKII
100 Watt pro Kanal
< 0,03 %
< 0,03 %
10 bis 80.000 Hz
260
Minimum 4 Ohm
115 dB
27 kOhm/1,0 V
230 Volt, 50 Hz
800 Watt
440 x 139 x 396 mm
15,5 kg
< 0.03%
< 0.03%
10Hz-80kHz
260
min. 4Ω
115 dB
27kΩ/1.0 volt
230 Volt/50 Hz
800 W
440 x 139 x 396 mm
15.5 Kg
27 kohmios/1'0 V
115 voltios/60 Hz
230 voltios/50 Hz
800 vatios
440 x 139 x 396 mm
15'5 kg
25