Attaching The Antenna; Powering On/Off (On-Off/End/Home Key); Powering On (Emergency Button); Powering On With Transmit Inhibit (Txi) Active - Motorola MTH800 Handbuch

Attaching the Antenna

Powering On/Off (On-Off/End/Home Key)

Powering On (Emergency Button)

Powering On with Transmit Inhibit (TXI) Active

Pressing the Emergency button, even if Transmit Inhibit is activated, causes
! !
the MTH800 to transmit immediately. The MTH800 must NOT be within the
W A R N I N G
RF sensitive area when entering Emergency Mode.
Downloaded from www.Manualslib.com
Turn the MTH800 Off before installing or removing the antenna.
Insert the bottom of the antenna into the screw-in base on the top of
the MTH800. Turn counter clockwise until snug. Do not force.
To power On, press and hold
check and registration routine. After successful registration, the
MTH800 is in service.
To power Off, press and hold
Powering Off message is displayed.
Press and hold the Emergency button to power On. The MTH800
will power On in Emergency Mode or in standard mode (as
programmed).
Transmit Inhibit is a feature allowing you to switch off transmission
before entering a Radio-Frequency (RF) sensitive area. To activate
this feature, press
> On.
manuals search engine
Turn counter-clockwise
to attach
. Your MTH800 performs a self-
. You will hear a beep and the
and select More...> Networks > TXI Mode
23