Troubleshooting - P.Lindberg 9060983 Original Bedienungsanleitung

Troubleshooting

Problem
The ATV does not operate.
The ATV suddenly stops after
having operated for a short
time.
Only operates for a short
period of time after charging
– less than 15 minutes.
P. Lindberg A/S
Tel.: +45 70212626
Cause
The battery does not have
sufficient power.
The charger does not
function.
Loose cables or connections.
The fuse has blown.
The motor or the electric
switch is damaged.
The battery does not have
sufficient power.
23
Sdr. Ringvej 1
6600 Vejen, Denmark
Solution
Charge the battery. NB: The
battery must be charged for
at least 12 hours before
taking into use for the first
time and thereafter it must
be charged for 8 hours.
Check all connections and
tighten.
Check that the power socket
works.
Use a voltmeter to check
whether the charger is
functioning – if required,
contact an electrician.
Check all cables and
connections and tighten.
The fuse will blow with
overloading and stop the
motor.
Overloading will cause the
motor to overheat. Replace
the fuse, cf. the instructions
and adjust the driving
conditions that are causing
the motor to overheat.
Contact a qualified
electrician.
Charge the battery. NB: The
battery must be charged for
at least 12 hours before
taking into use for the first
time and thereafter, it must
be charged for 8 hours.
Check all connections and
tighten.
Check that the power socket
works.
MAN 9060983 EN V1
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk