EN
appliance to cool before cleaning or storing away.
• Use your appliance for its intended purposes as recommended.
WARNING
:
1- NEVER use your hair styler when in the bath, shower or in the areas
in contact with water and when your hands are wet.
2- When you do not use your appliance, ALWAYS set the
button off position for closing and unplug your appliance.
If closing water while your appliance is off but plug, it will
cause a danger.
3-When you want to remove the head of the appliance, be SURE to
wait for your appliance to cool down. Since your appliance gets heated
during use, the head of the appliance might be hot as well.
4-After using your appliance, wait for accessories to cool down before
removing them as they might be hot.
SUGGESTION OF USE
• You can have wavy, curly, straight, and shining hairs by using your
Arzum Volume Pro Hot air styler.
• To release any tangles in your hair before
using your hairstyler, comb your hair with a
brush or comb.
• In order to obtain more lasting results apply
a little foam/jelly to your hairs before using this
hairstyler.
• Use your hairstyler only with your hairs
slightly damp, but not with your hairs wet.
• Push accessory removing button while detaching brushes,
straightening tool, comb, volume increaser, or airflow concentrator.
To install a different accessory header, put the brush header on the
housing as to fit onto the triangular symbol on the upper part of
accessory release button. Then, when you slightly turn it to the left, you
will hear a click.
• Your appliance will be read to use after plugged in. In a few seconds it
will reach the proper operating temperature.
ARZUM
13