Specifications; General Power Tool Safety Warnings - Makita DTL062 Betriebsanleitung

ENGLISH (Original instructions)
1. Red indicator
2. Button
3. Battery cartridge
4. Star marking
5. Indicator lamps
6. Check button
7. Switch lever
8. Lamp

SPECIFICATIONS

Capacities
No load speed (min
Impacts per minute
Max. fastening torque
Overall length
Rated voltage
• Due to our continuing program of research and development, the specifications herein are subject to change without
notice.
• Specifications may differ from country to country.
• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heaviest
combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge
Charger
• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING:
• Only use the battery cartridges and chargers listed above. Use of any other battery cartridges and chargers may
cause injury and/or fire.
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
General power tool safety
warnings
WARNING: Read all safety warnings, instructions,
illustrations and specifications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, fire and/or serious injury.
Explanation of general view
9. Reversing switch lever
10. Socket
11. Anvil
12. Groove
13. Screw
14. Hook
15. Hex bolt
16. Angle head
Model
Standard bolt
High tensile bolt
Square drive
-1
)
Net weight
D.C.14.4 V Model
D.C.18 V Model
DTL062
1.4 - 1.8 kg
D.C. 14.4 V
BL1415N/BL1430/BL1430B/BL1440/BL1450/BL1460B
BL1815N/BL1820/BL1820B/BL1830/BL1830B/BL1840/
BL1840B/BL1850/BL1850B/BL1860B
DC18RC/DC18RD/DC18RE/DC18SD/DC18SE/DC18SF
Save all warnings and
ENE033-1
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
GEA010-2
CORDLESS IMPACT WRENCH
SAFETY WARNINGS
1. Hold the power tool by insulated gripping
surfaces, when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal parts
17. Tooth
18. Straight head
19. Ratchet head
20. Standard bolt
21. Fastening torque
22. Proper fastening torque
23. Fastening time (S)
24. High tensile bolt
DTL063
M4 - M12
M4 - M8
9.5 mm
0 - 2,000
0 - 3,000
60 N•m
387 mm
1.4 - 2.0 kg
D.C. 18 V
GEB138-1
5