Specifications - Makita BTL060 Bedienungsanleitung

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Switch lever
3-1. Lamp
4-1. Reversing switch lever
6-1. Bit

SPECIFICATIONS

Capacities
No load speed (min
Impacts per minute
Max. fastening torque
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.
Noise
The typical A-weighted noise level determined according
to EN60745:
Sound pressure level (L
Sound power level (L
Uncertainty (K) : 3 dB(A)
Wear ear protection
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model BTL060
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Model BTL061
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (a
Uncertainty (K) : 1.5 m/s
Explanation of general view
6-2. Sleeve
8-1. Insert bit
8-2. Spindle
9-1. Groove
9-2. Screw
9-3. Hook
10-1. Hex bolt
Model
Machine screw
Bolt
-1
)
Overall length
Net weight
Rated voltage
) : 91 dB(A)
pA
) : 102 dB(A)
WA
2
) : 9.5 m/s
h
2
2
) : 17.5 m/s
h
2
BTL060
1.7 kg
D.C. 14.4 V
ENE033-1
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
ENG905-1
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
Be sure to identify safety measures to protect the
•
ENG900-1
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
EC Declaration of Conformity
We Makita
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Angle Impact Driver
Model No./ Type: BTL060,BTL061
are of series production and
3
10-2. Angle head
11-1. Groove
11-2. Tooth
12-1. Straight head
13-1. Ratchet head
BTL061
4 mm - 8 mm
4 mm - 12 mm
0 - 2,000
0 - 3,000
60 N•m
387 mm
D.C. 18 V
Corporation as the
1.5 kg
ENG901-1
ENH101-15
responsible