Despite intended use, certain residual risks remain. Due to the design and construction of the
machine, hazardous situations may occur which are identified as follows in these operating
instructions:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
Such a safety instruction indicates a potentially hazardous situation which, if not
avoided, may result in serious injury or even death.
A safety instruction designed in this way indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate injury.
A safety note designed in this way indicates a potentially dangerous situation which,
if not avoided, may result in property damage.
Irrespective of all safety regulations, their sound common sense and corresponding technical
suitability/training are and remain the most important safety factor in the error-free operation of
the machine. Safe working depends first and foremost on you!
13
ASSEMBLY
Check scope of delivery
After delivery, check the machine immediately for transport damage and missing Parts.
Assembly
13.2.1 ZI-STE2800
1. Wheels assembly
3. Assembly rubber feet
ZIPPER MASCHINEN GmbH
ZI-STE2800; ZI-STE5500; ZI-STE800; ZI-STE8004
Hazard warnings
www.Zipper-Maschinen.at
D A N G E R
W A R N I N G
C A U T I O N
N O T I C E
2. Handle assembly
ASSEMBLY
34