Introduction; Proper Use; Features And Equipment - Parkside PMGS 12 Bedienungs- Und Sicherheitshinweise

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
V ~
Volt (AC)
W
Watts (Effective power)
Direct current
(Type of current and voltage)
n
Design no-load speed
0
mA
Milliamps / Amps / Amp-hours
A / Ah
Safety class II
observe caution and safety notes!
Risk of explosion!!
Modelling and engraving set
PMGS 12
Introduction
Q
Please make sure you familiarise yourself
fully with the way the device works before
you use it for the first time and that you
understand how to handle electrical power tools
correctly. To help you do this please read the accom-
panying operating instructions. Keep these instructions
in a safe place. If you pass the device on to anyone
else, please ensure that you also pass on all the
documentation.

Proper use

Q
The small drill is to be used for drilling, milling, en-
graving, polishing, cleaning up, grinding, separating
26 GB/MT
Keep children away from electrical
power tools!
Caution – electric shock!
Danger to life!
For indoor use only!
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Avoid contact with rapidly
rotating tools!
Risk of fire!
Proper procedure and handling.
Dispose packaging and appliance in
an environmentally-friendly way!
and sawing of wood, metal, plastic, ceramic or stone
in dry rooms. Any other use or modification to the
drill / grinder shall be considered as improper use
and could give rise to considerable dangers. The
manufacturer will not accept liability for loss or
damage arising from improper use. Not intended
for commercial use.

Features and equipment

Q
Small drill:
oN / oFF switch / Rotational speed control
1
Metal stirrup hanger
2
Plug for mains adapter
3
Clamping nut
4
Spigot nut
5
Spindle lock
6