Faber ENGDL20 Anleitung Seite 21

Opti-myst wall Fire
Model: ENGDL20
IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE
Important Safety Information:
If the appliance is damaged, contact your supplier before you install it and use it.
Never use the appliance outdoors or in the immediate vicinity of a bath, shower or swimming pool.
Don't install the fi re under a fi xed wall socket or junction box.
This appliance is not intended for use by children or other persons without assistance or supervision if their
physical, sensory or mental capabilities prevent them from using it safely. Children should be supervised to
ensure that they do not play with the appliance.
Do not use this heater in series with a thermal control, a program controller, a timer or any other device that
switches on the heat automatically, since a fi re risk exists when the heater is accidentally covered or displaced.
Ensure that furniture, curtains or other combustible material are positioned no closer than 1 metre from the
heater.
Remove the plug from the wall socket if it is damaged or if the fi re will not be used for a long time.
Although this heater complies with safety standards, we do not recommend its use on deep pile carpets or on
long hair type of rugs.
The appliance must be positioned so that the plug is accessible.
Keep the mains lead away from the front of the fi re and replace it if it is visibly damaged.
WARNING: In order to avoid overheating, do not cover the fi re. Do not place material or garments on the fi re, or
obstruct the air circulation around the fi re.
General
Carefully unpack the fi re and save the packaging for any future use (in case of moving house or returning the fi re to the supplier).
The fi re has a fl ame eff ect that can be used with or without the heating.
Before connecting the fi re, check whether the supply voltage is the same as the voltage indicated on the fi re.
Note: If you use the fi re in an area with little background noise, you may hear a sound when the fi re is turned on with the fl ame eff ect.
This is normal so do not worry.
KEEP THIS MANUAL FOR FUTURE REFERENCE
Use only water with a hardness of maximum 10dH. Ask your water company what is the hardness of your tap water. Decalcify
the water or use demineralised water in case of a higher level of hardness.
If you don't use the fi re for 2 weeks or longer, we advise you to remove the water from the receptacle and the fi lling tank and
to dry the receptacle.
Once the fi re is in use, it may not be moved or set on its back without removing the water from the receptacle and the water
tank.
The water tank, receptacle, receptacle cover, tank cover and air fi lters should be cleaned once a fortnight - in the case of
intensive use of more than 2 hours per day they should be cleaned weekly.
Never use the apparatus if the lamps do not work.
The lamps should be checked regularly as described in 'Maintenance' and 'Replacing the lamps' .
Installation
Make sure that all packaging is removed. (Read the warning labels carefully.)
Save the packaging for any future use.
Make sure that the apparatus is spirit-level mounted on the wall.
16