Inhaltsverzeichnis
Werbung
in it.
• D o not overfill the kettle. There
is a risk of scalding due to water
possibly bubbling over. Please
refer to the operating instruc-
GB
tions or the level indicators on
your appliance for the maximum
filling level.
• Use the kettle only with the
corresponding base unit.
• D o not use the kettle without
the limescale filter strainer.
• D o not use the kettle without
the lid.
• D o not open the lid while heat-
ing.
• D uring use, parts of the kettle
become very hot. Avoid touch-
ing these parts and avoid con-
tact with the hot steam.
• A fter use, the surface of the
heating element still has residu-
al heat. Avoid contact with the
inner surfaces of the device.
• A lways unplug the unit from the
power supply before assembling,
disassembling or cleaning, and
when not under supervision.
• N ever immerse the kettle in
water.
• D o not allow the power cable
to come into contact with liquids.
• D o not use the kettle if the
power cable is damaged.
• D o not clean parts that come
into contact with food with
aggressive cleaning agents or
scouring milk. Remove deter-
gent residues with clean water.
Further information on cleaning
can be found under "Cleaning
and care".
6
• T his appliance may be used by
children 8 years of age or older
if they are supervised or have
been instructed in the safe use
of the appliance and have under-
stood the hazards involved.
• C leaning and maintenance must
not be carried out by children
unless they are 8 years or older
and are supervised.
• K eep the appliance and power
cord away from children under 8
years of age.
• T he device may be used by peo-
ple with reduced physical, sen-
sory or mental abilities or lack
of experience and/or knowledge
if they have been supervised or
instructed in the safe use of the
device and have understood the
resulting hazards.
• D o not allow children to play
with the kettle.
• R eplacement of the power cable
and any other repairs must only
be carried out by Melitta
tomer Service or an authorised
workshop.
2. Before first use
• Ensure that the power supply in your home
corresponds to that on the model plate on the
base of the appliance.
• Connect the base unit to a power source. Unused
cable can be stored in the base of the appliance .
• All kettles have been tested during production to
ensure they work perfectly. Therefore there may be
remaining water deposits. Clean the appliance before
use by boiling the maximum amount of water twice.
3. Heating water
• Ensure that the kettle is connected to a power
supply.
• Open the lid . The lid is not detachable.
• Fill the kettle with the desired amount of cold water.
With the help of the level markers on the right
and left you can measure the desired amount of
water.
• Never use the kettle without water, fill it with at
Cus-
®
Werbung
Inhaltsverzeichnis
