Installation; Kitchen Unit Requirements - Franke CA 52M Gebrauchs- Und Installationsanweisungen

Installation

Important: installation must be done in compliance with established standards and
regulations. It must be done exclusively by a specialised and licensed technician.

Kitchen unit requirements

For built-in units, the components
(plastic materials and wooden
veneer) must be assembled with
heat resistant adhesive (max
100°C): unsuitable materials and
adhesives can result in warping and
failure of the adhesive. The unit
must allow sufficient room for the
electrical cabling. The unit must be
robust enough to support the
weight of the appliance.
The oven must be securely installed
in the compartment. The oven may
be installed in a column unit or
underneath the top of a modular
unit, so long as sufficient ventilation
is provided.
24