Ec Declaration Of Conformity - stayer SA21-180 Bedienungsanleitung

P = Rated input power
1
n = Nº of revolutions without load
D = Maximum disk diameter
max
M = Spindle thread
m = Mass
Typical noise levels in evaluation A:
a = Acceleration typically evaluated in the
hw
hand/arm
L = Acoustic pressure level
A
P
L = Acoustic power level
WA
The noise level when working can exceed 85 dB (A).
Wear helmets hearing protection!
Measured values ​ ​ e stablished in accordance with EN
60745.
The technical specifications set forth herein are understood within
certain tolerances (In accordance with the present
arrangements).

6.2 EC Declaration of conformity

The undersigned: STAYER IBERICA, S.A.
With address at:
Calle Sierra de Cazorla, 7
Área Empresarial Andalucía - Sector 1
28320 PINTO (MADRID)
Tel.: +34 902 91 86 81 / Fax: +34 91 691 91 72
CERTIFIES
That the machine:
Type: Angle Grinder
Models:
SA21-180 / SA21-230 / SAB22-18 / SAB22-23
/ SAB24-18AL / SAB24-23AL / AGR22-23
/ AGR24-18AL / AGR24-23AL / AGR26-23AL
We declare under our sole responsibility that this product is
in conformity with the following standards or standardized
documents:
UNE EN 60745-2-11:2011, UNE EN 60745-2-3:2011,
according to EU Regulations 2006/42/CE, 2004/108/CE.
Ramiro de la Fuente
Director General
ENGLISH
22
April 7, 2014
22