Appropriate Usage; Contents - VOLTCRAFT B5 Bedienungsanleitung

2. Appropriate usage

The "Multicharger B5" is used to charge NiCD + NiMH type batteries (1-14 cells), LiPo batteries
(1-5 cells) and lead acid batteries (1-6 cells, 2-12V). The charge current can be set between
0.1A and 5.0A independently of the battery attached.
The charger may only be connected to a direct current between 11V and 18V.
A two-line illuminated LCD display and four keys are used to control the charger.
A balancer is integrated into the charger for LiPo batteries, with balancer connector sockets
for the battery located on the side of the charger.
The product is intended for use in dry indoor environments and must not get damp or wet!
Any use other than that described above could lead to damage to the product and increase the
risk of a short circuit, fire, electric shock, etc.
No part of the product should be modified or reassembled.
Observe all safety instructions and information within this operating
manual.

3. Contents

• battery charger
• current connection cable with crocodile clips for connecting to supply voltage
• set of connector cables
• operating instructions
37