Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
7
After using your pressure washer
DE
EN
7.1 Storing the washer
CS
SK
7.2 Winding up of electric cable
and high pressure hose
7.3 Storage of accessories
38
The machine should be stored
in a frost-free room!
Pump, hose and accessories
should always be emptied of water
prior to storing as follows:
1. Stop the machine (turn the start/
stop switch (1) to position"O")
and detach water hose and ac-
cessory.
2. Restart the machine and acti-
vate the trigger. Let the machine
run until no more water runs
through the spray gun.
3. Stop the machine, unplug and
wind up hose and cable.
4. Place spray handle, nozzles and
other accessories in the holders
of the machine.
Should the machine by mistake
be frozen, it will be necessary to
check it for damage.
NEVER START-UP A FROZEN
MACHINE.
Frost damages are not covered
by the guarantee!
To avoid accidents, the electric
cable and the high pressure hose
should always be winded carefully
up.
Wind up the electric cable on the
appropriate hooks (16). Built-in clip
for good holding.
Push the hose into the reel and
afterwards wind it up.
The standard accessories (spray
gun, spray lance, nozzles and
foam sprayer) can be stored on the
pressure washer.
The nozzle cleaning tool can also
be stored on the product.
Original Instructions
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
