Fuel EC 1000 Benutzerhandbuch Seite 44

7. Press RESET button to go back to main menu.
Drawing 20
WATT program mode-
1. In main menu, press
2. There are 6 profiles (W1~W6) in WATT program mode. Press
profiles from W1 to W6 (Drawing 23 shows the first profile).
Press MODE key to enter a profile.
3. Set Target workout TIME, preset value is 30 minutes (setting range 5:00~99:00).
4. Press START button to start workout (user can also start workout without setting TIME).
5. During workout, user may use
6. During workout, system will adjust Load level based on WATT/RPM.
7. Press STOP button to stop workout. When the TIME has count down to 0:00, system will
STOP automatically.
8. Press START button to continue workout or press RESET button to go back to main menu.
Drawing 23
Drawing 21
to get into WATT program mode.
or to adjust WATT level.
44
Drawing 22
or to review