Panasonic WV-CW960 Bedienungsanleitung Seite 8

WV-CW960_US 05.11.18 11:08 ページ8
■ Downloading (saving) or uploading (recovering)
camera setting information
Camera setting information that can be downloaded to
the system controller etc, includes existing preset
position settings and menu settings. However, the
following items are not included.
• Patrol function (page 35)
• Area title function (page 37)
• Blemish compensation pattern (page 42)
• RS485 settings (page 21)
• Password settings (page 45)
Be sure the camera is not moving and aimed at
something that moves very little (like a wall) before
downloading camera preset data to the system
controller etc. or uploading downloaded data to the
camera.
Uploading of WV-CW960 series preset data to other
models (e.g. WV-CW860 series and WV-CW860A
series) may cause an error and failure of the uploading
process.
■ Self-diagnosing Function
If abnormal operation due to external noise or some
other reason continues for more than 30 seconds, the
camera will automatically reset itself and restore
normal operation.
initialisation routine that is performed when the camera
is turned on. If the reset is required too often, it could
mean that the camera is installed in a location where
there is a large amount of external noise. This can
cause malfunction of the camera, so you should
contact a qualified service person or system installer
as soon as possible.
■ Combining devices
There is a limit to the number of devices that can be
put together in
specifications and outer dimensions before hooking up
the devices. For more information, see the "Panasonic
CCTV System Catalogue" or consult your retailer.
Reset operation the
one configuration. Check
same
the
-8-