Preparation For Use; Scope Of Delivery; Instructions For Use - Ottobock 2R8 Serie Gebrauchsanweisung

► Ensure that the approved service life is not exceeded.
► Only use the product on a single patient.
CAUTION
Mechanical damage to the product
Risk of injury due to change in or loss of functionality
► Use caution when working with the product.
► If the product is damaged, check it for proper function and readi­
ness for use.
► In case of changes in or loss of functionality, do not continue
using the product (see "Signs of changes in or loss of functional­
ity during use" in this section).
► Take any necessary measures (e.g. repair, replacement, inspec­
tion by the manufacturer's customer service, etc.).
Signs of changes in or loss of functionality during use
Among other factors, changes in functionality can be indicated by an
altered gait pattern, a change in the positioning of the prosthetic com­
ponents relative to each other and by the development of noises.

4 Scope of delivery

2R8*, 2R31*, 2R54* Foot adapters
Quantity Designation
1

Instructions for use

1 Foot adapter
Spare parts/accessories (not included in the scope of deliv­
Quantity Designation
Ottobock special adhesive with hardener
Single component pack for 2R8=M8
8
Reference num­
ber
–
–
ery)
Reference number
636W28
636W18 and 636W19
2D6=M8
Spare parts/accessories (not included in the scope of deliv­
Quantity Designation
Single component pack for 2R8=M10
Each consisting of
1 Washer
1 Cap screw (steel)
Single component pack for 2R31=M8,
2R54=M8
Single component pack for 2R31=M10,
2R54=M10
Each consisting of
1 Washer
1 Cap screw (titanium)

5 Preparation for use

CAUTION
Incorrect alignment or assembly
Risk of injury due to damaged prosthetic components
► Observe the alignment and assembly instructions.
5.1 Mounting the adapter
CAUTION
Improper assembly of the screw connections
Risk of injury due to breakage or loosening of the screw connec­
tions
► Clean the threads before every installation.
► Apply the specified torque values.
► Follow the instructions regarding the length of the screws and
about how to secure the screws.
ery)
Reference number
2D6=M10
–
–
2D7=M8
2D7=M10
–
–