Pulsar DIGISIGHT ULTRA N450 LRF Bedienungsanleitung Seite 11

•
Default settings
Press and hold the MENU button (6) to enter the main menu.
•
Press the MENU button (6) briefly to enter the "General Settings" submenu.
•
Enter the "Default Settings" submenu by pressing the MENU button (6) briefly.
•
Use the UP (7) and DOWN (5) buttons to select "Yes" to restore default settings or "No"
to cancel.
•
Confirm your selection by pressing the MENU button (6) briefly.
If "Yes" is selected, display will show "Return default settings?" and "Yes" and "No" items.
Select "Yes" to restore default settings. If "No" is selected, action is canceled.
The following settings will be restored to their original values before changes made by
the user:
•
Operating mode of video recorder – video
•
Display brightness - 10
•
Display contrast - 10
•
Zeroing profile - A
•
Reticle selection from the riflescope's memory - 1
•
Reticle color - black/red (black reticle, red cross)
•
Reticle brightness - 5
•
Interface language - English
•
Wi-Fi - disconnected + default password
•
Zoom - optical, digital zoom off
•
Unit of measurement - metric
•
PiP - off
•
Side incline – off
•
Auto shutdown - off
•
SumLight - off
•
IR illuminator - off
•
Formatting
Press and hold the MENU button (6) to enter the main menu.
•
Press the MENU button (6) briefly to enter the "General Settings" submenu.
•
Enter the "Formatting" submenu by pressing the MENU button (6) briefly.
•
Use the UP (7) and DOWN (5) buttons to select "Yes" to format the memory card or "No"
to cancel.
Attention! Formatting of the integrated memory card will irrevocably delete all saved files
- before formatting, back up important files using an alternative carrier.
MICROPHONE
In this menu item you can activate the microphone in the riflescope, designed to support
the operation of the device with sound: recording video files with sound, transmitting
sound via Wi-Fi.
•
Press and hold the MENU button (6) to enter the main menu.
•
Use the UP (7) and DOWN (5) buttons to select "Microphone" menu item.
•
By pressing the MENU button (6) briefly, turn on (On) or turn off (Off) the microphone.
If the microphone is turned off, the video file is recorded without sound.
ACCELERO-
This menu item includes 2 subitems: "Auto shutdown" and "Side incline" functions.
METER
USER MANUAL FOR DIGISIGHT ULTRA LRF NIGHT VISION DIGITAL RIFLESCOPE
"Auto shutdown"
This item allows you to activate automatic shutdown, which recognizes whether your
function riflescope is in a non-operating position (tilt up or down at an angle of more than 70 °,
right or left - at an angle of more than 30 °).
•
Press and hold the MENU button (6) to enter the main menu.
•
Use the UP (7) and DOWN (5) buttons to select the "Accelerometer" submenu, confirm
the selection by pressing the MENU button (6) briefly.
•
Use the UP (7) and DOWN (5) buttons to select "Auto shutdown".
•
Press the MENU button (6) briefly to enter the submenu.
•
Use the UP (8) and DOWN buttons (10) to select the time period (1 min, 3 min, 5 min)
upon expiry of which the riflescope will automatically shut down, or select "Off" if you
wish to deactivate Auto shutdown.
•
Confirm your selection by pressing the MENU button (6) briefly.
Note: If the function is activated, the status bar shows an icon and shutdown time period
as "1 min".
"Side incline" This item allows you to activate/deactivate the indication of horizontal (side) incline of
function the weapon. Side incline is indicated by "sector" arrows to the right and left of the reticle.
Arrows show the direction in which you should move your rifle to eliminate side incline.
There are three modes of side incline:
5°-10 ° - one sector arrow;
10°-20 ° - two sector arrow (see figure);
> 20° - three sector arrow.
A side incline of less than 5° is not displayed.
•
Press and hold the MENU button (6) to enter the main menu.
•
Select the "Accelerometer" submenu.
•
Press the MENU button (6) briefly to enter the "Side incline" submenu.
•
Use the UP (7) and DOWN (5) buttons to select "On" to turn on the incline indication, or
"Off" to turn it off.
•
Confirm your selection by pressing the MENU button (6) briefly
WI-FI SETTINGS
This menu item allows you to set up your riflescope for operation in a Wi-Fi network.
Password setup
This submenu of the main menu allows you to set a password to access your riflescope
from an external device. The password is used to connect an external device (i.e.
smartphone) to your riflescope.
•
Press and hold the MENU button (6) to enter the main menu.
•
Press the MENU button (6) briefly to enter the "Wi-Fi Settings" submenu.
•
Use the UP (7) and DOWN (5) buttons to select menu item . Press the MENU button (6)
briefly.
•
The default password "12345678" appears on the display.
•
Use the UP (7) and DOWN (5) buttons to set the desired password (button UP (7) to
increase value; button DOWN (5) to reduce). Switch between digits with a brief press of
the MENU button (6).
•
Save the password and exit the submenu by pressing and holding the MENU button (6).
11