How To Activate The Rinse Aid Dispenser; Technical Data - Electrolux ESF 64075 Benutzerinformation

Problem
The dishes are wet.
The dishes are wet and matt.
HOW TO ACTIVATE THE RINSE AID
DISPENSER
1. Switch off the appliance.
2. Press and hold the start /cancel button.
3. Turn the programme knob counter-
clockwise until the programme marker
agrees with the first available washing
programme on the control panel.
4. Release the start/cancel button.
– The display shows the electronic ad-
justment of the water softener.
5. Turn the programme knob counter-
clockwise until the programme marker
agrees with the second available wash-
ing programme on the control panel.
– The display shows the current set.

TECHNICAL DATA

Dimensions
Water supply pressure
1)
Water supply
Capacity
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
The rating plate on the inner edge of
the appliance door shows the electrical
connection data.
If the hot water comes from alternative
sources of energy, (e.g. solar panels,
Possible cause
The detergent can be the
cause.
The washing programme was
without a drying phase or with
a decreased drying phase.
The rinse aid dispenser is emp-
ty.
The multitab function is on (this
function automatically deacti-
vates the rinse aid dispenser).
Rinse aid dispenser
deactivated
Rinse aid dispenser
activated
Width
Height
Depth
Minimum
Maximum
Cold water or hot water
Place settings
Use a different brand of deter-
gent.
For better drying results, keep
the door ajar for some minutes.
Fill the rinse aid dispenser with
rinse aid.
Activate the rinse aid dispenser.
6. Press the start/cancel button to change
the set.
– The display shows the new adjust-
ment.
7. Turn the programme knob to off posi-
tion to keep the operation.
photovoltaic panels and aeolian), use a
hot water supply to decrease energy
consumption.
electrolux 35
Possible solution
600 mm
850 mm
610 mm
0.5 bar (0.05 MPa)
8 bar (0.8 MPa)
maximum 60 °C
12