Multitab Button; Use Of The Appliance; Setting The Water Softener - Electrolux ESF 64075 Benutzerinformation

• To adjust electronically the level of the
water softener. Refer to 'Setting the wa-
ter softener'.
• To deactivate/activate the rinse aid dis-
penser when the multitab function is on.
Refer to 'What to do if...'.

MULTITAB BUTTON

Press this button to activate/deactivate the
multitab function. Refer to 'Multitab func-
tion'.
DELAY START BUTTON
Press this button again and again to delay
the start of the washing programme from 1
to 19 hours.
DISPLAY
The display shows:
• The electronic adjustment of the level of
the water softener
• The activation and deactivation of the
rinse aid dispenser (only with the multitab
function on)
• The time of the washing programme
• The remaining time to the end of the
washing programme
• The end of a washing programme (the
display shows a zero)

USE OF THE APPLIANCE

1. Be sure that the set level of the water
softener agrees with the water hardness
in your area. If not, adjust the water
softener.
2. Fill the salt container with dishwasher
salt.
3. Fill the rinse aid dispenser with rinse aid.
4. Load cutlery and dishes into the appli-
ance.
5. Set the correct washing programme for
the type of load and soil.

SETTING THE WATER SOFTENER

The water softener removes minerals and
salts from the water supply. These minerals
and salts can cause damage to the appli-
ance.
• The time of the delay start
• The alarm codes.
SETTING MODE
The appliance must be in setting mode
for these operations:
• To set a washing programme.
• To set a delay start.
• To adjust electronically the level of the
water softener.
• To activate or deactivate the rinse aid
dispenser (only with the multitab function
on).
Activate the appliance. The appliance
is in setting mode when:
• The time of the last set washing pro-
gramme flashes in the display.
• The indicators of the phases of the wash-
ing programme come on.
Activate the appliance. The appliance
is not in setting mode when:
• The time of the washing programme or of
the delay start do not flash in the display.
• Only one phase indicator is on.
– It is necessary to cancel the pro-
gramme or the delay start to go back
to the setting mode. Refer to 'Select
and start a washing programme'.
6. Fill the detergent dispenser with the cor-
rect quantity of detergent.
7. Start the washing programme.
If you use the combi detergent tablets
('3 in 1', '4 in 1', '5 in 1'), use the multi-
tab function (refer to 'Multitab func-
tion').
Adjust the level of the water softener if this
does not agree with the water hardness in
your area.
Contact your local water authority to know
the water hardness in your area.
electrolux 25