Installing The Appliance - Progress PM276 Benutzerhandbuch

Installing the appliance

4 mm
4 mm
4 mm
1. Remove all packaging and check
carefully for any signs of damage.
2. This oven is designed to fit into a 360 mm
high cupboard as standard. When fitting
into a 350 mm high cupboard:- Unscrew
and remove the 4 feet from the bottom of
the oven. There are 3 tall feet and 1 short
foot. Replace the 3 tall feet with those
provided in the accessory pack. Do not
replace the short foot.
3. Fit the fixing hooks to the kitchen
cupboard using the instruction sheet and
template supplied.
4. Fit the appliance into the kitchen
cupboard slowly, and without force. The
appliance should be lifted onto the fixing
hooks and then lowered into place. In the
case of interference during fitting, this
hook is reversible. The front frame of the
oven should seal against the front
opening of the cupboard.
5. Ensure the appliance is stable and not
leaning. Ensure that a 4 mm gap is kept
between the cupboard door above and
the top of the frame (see diagram).
Progress
79