Setting Up The One For All; Direct Code Set Up - One for All urc 7950 Bedienungsanleitung

Setting up the ONE FOR ALL 5

Before you start, please read these instructions carefully

Direct code set up

Example: To set up the ONE FOR ALL 5 for your television:
1
2
3
_ _ _ _
4
5
6
7 If your device does not respond, follow steps 1 to 5 with
each code listed for your brand. If none of the codes listed
for your brand operate your device, or if your brand is not
listed at all, try the search method described on page 6.
Important notes:
WWW.ONEFORALL.COM
165
device is switched on (not on standby).
TV key
hold down
(four-digit device code)
press POWER If your device switches off, the ONE
FOR ALL 5 is ready to operate your device.
Make sure your
M (MAGIC) key
143 -
x2