List of pictograms used
Direct current
Motion detector detection range
approx. 12 m (weather dependant)
LED solar spotlight
Introduction
We congratulate you on the purchase of your new
product. You have chosen a high quality product.
The instructions for use are part of the product.
They contain important information concerning
safety, use and disposal. Before using the product,
please familiarise yourself with all of the safety
information and instructions for use. Only use the
product as described and for the specified applica-
tions. If you pass the product on to anyone else,
please ensure that you also pass on all the docu-
mentation with it.
Intended use
This product is suitable for outdoor use. This
product is only intended for private use and is not
suitable for commercial use or for use in other
applications.
Description of Parts
Dowels (mounting material for spotlight,
1
Ø 9mm)
Screws (mounting material for spotlight,
2
Ø 6 x 40mm)
Mounting bracket
3
Hinge joint
4
Spring washer
5
Flat washer
6
Fasten screws
7
6
GB/IE/NI
Protection class III
Splashproof (IP44)
Solar electricity socket
8
Motion detector
9
Spotlight
10
ON / OFF switch
11
Solar cell
12
Screws (mounting material for solar cell,
13
Ø 4 x 34mm)
Solar cable plug
14
Dowels (mounting material for solar cell,
15
Ø 6mm)
Rotary control LUX
16
Rotary control SENS
17
Rotary control TIME
18
Included items
Immediately after unpacking, check that all the
items and accessories are present and that the
product is in perfect condition.
1 spotlight
1 Solar cell
2 screws (mounting material for spotlight
Ø 6 x 40 mm)
4 screws (mounting material for solar cell
Ø 4 x 34 mm)
2 dowel (mounting material for spotlight Ø 9 mm)
4 dowel (mounting material for solar cell, Ø 6 mm)
1 operating instructions
Technical data
Operating voltage:
Lithium-ion battery:
7,4 V
(direct current)
7,4 V
(direct current),
1800 mAh (not replaceable)