Cleaning And Care; Cleaning And Care Instructions; Stainless Steel Surfaces; Glass Surfaces - GUTMANN FLOTAR 9200EM Bedienungsanleitung

EN

Cleaning and care

Cleaning of surfaces
Danger due to electric shock ! Disconnect the extractor hood from the power supply by
pulling the plug out of the socket or by switching off the fuse. When cleaning, make
sure that no water penetrates the device. Regular cleaning of the surface saves labori-
ous removal of stubborn contamination. Only use conventional detergents or universal
cleaning agents suitable for cleaning stainless steel/aluminium. Never use abrasive
cleaning agents or steel wool. After cleaning the hood, treat the stainless steel surfaces
with a stainless steel care product. Painted surfaces should only be cleaned using a
mild detergent solution and a very soft cloth. Only use a soft damp cloth to clean the
operating panel.
On hoods fitted with a panel below the filter (edge extraction), grease deposits occur at
the edge of the panel. These deposits occur for physical reasons and are not due to a
malfunction of the hood. Please clean the panel underneath the filter regularly to pre-
vent the formation of stubborn residues.

Cleaning and care instructions

When cleaning the grease filters, also remove any grease deposits from the accessible
housing components. This will prevent a fire hazard and maintain an optimum range of
functions. Use hot soapy water or a mild window cleaning agent to clean the hood. Do
not scratch off baked-on deposits. Soften them using a damp cloth. Do not use abrasi-
ve agents or scouring pads.
Note: Do not use alcohol (spirits) on plastic surfaces, as dull spots may result.
Caution: Ventilate the kitchen sufficiently, no open flame.

Stainless steel surfaces:

Use a mild stainless steel cleaner. Do not clean stainless steel surfaces with scratching
sponges and cleaning agents containing sand, soda, acid or chloride! Clean only in
grinding direction. We recommend our stainless steel cleaner TZ 710.

Glass surfaces:

The glass front installed on the cooker hood must only be cleaned with a mild glass
cleaner and a very soft cloth.
Aluminium, varnished and plastic surfaces:
Use a soft micro fibre cloth. Do not use dry cloths. Use a mild window-cleaning agent.
Do not use aggressive cleaning agents or agents containing acid or lye! Do not use
scouring agents.
26