Operation By Remote Control - GUTMANN CRISTAL 9100EM Bedienungsanleitung

EN
Operation via remote control
ON / OFF (1)
To switch on, press the field with the ON / OFF symbol. The fan starts at power level 1.
To switch off, press the ON / OFF symbol again.
The filter saturation indicator is also reset by pressing the key (~10 sec.) until the red
LED turns off.
Increase fan power (2)
Press the Increase fan power icon. The fan power increases by one power level each
time the button is pressed.
Reduce fan power (3)
Press the Reduce fan power icon. The fan power decreases by one power level up to
power level 1 with each press.
Illumination (4)
Press the button with the light icon to turn on the light.
Press the button again to turn off the backlight. If the
lighting symbol is held down for a longer time, the lighting
is dimmed. (LED lighting not dimmable)
Colour temperature setting
The colour temperature of the LED lighting can be infini-
tely adjusted
Press and hold the delay button (6) to adjust, the LEDs
start to change the colour temperature. When the desired
setting is reached, release the button, the colour setting
is saved.
Intensive level (5)
The maximum fan output is reached by pressing the In-
tensive level button. The fan power switches back by one
power level after 5 minutes.
Automatic follow-up time (6)
Touching the field with the follow-up time symbol activa-
tes the automatic follow-up time, the follow-up time sym-
bol lights up. The cooker hood switches back from level 3
to level 1 and continues to run there for ~15 minutes be-
fore switching off.
Note : If the RC functions are limited or not available
please check battery capacity first.
20
between 2700K and 6500K.
int