Scope Of Delivery; Technical Data; General Safety Instructions; Safe Operation - Parkside PBSG 95 C3 Originalbetriebsanleitung

Scope of delivery

1 Drill sharpener PBSG 95 C3
2 Replacement bricks
1 Instructions for use

Technical data

Dimensions:
Total weight:
Brick:
Rated voltage:
Rated power:
Rated idle
speed:
For drill Ø:
Protection class:
Noise emission value:
The A-rated noise level of the power tool is
typically:
Load (grinding):
Noise level L :
pA
Uncertainty K :
pA
Sound power level L
WA
Uncertainty K :
WA
General safety
instructions
WARNING! When using electric tools basic
safety precautions should always be followed
to reduce the risk of fire, electric shock and per-
sonal injury including the following. Read all
115 x 128 x 175 mm
(W x H x D)
945 g
46 g
220–240 V∼ (AC)
50 Hz
95 W
n 1350 min
-1
0
3–12 mm
II /
61.2 dB (A)
3 dB
: 74.2 dB (A)
3 dB
these instructions before attempting to operate
this product and save these instructions

Safe operation

1. Keep work area clear
Cluttered areas and benches invite injuries.
2. Consider work area environment
Do not expose tools to rain.
Do not use tools in damp or wet locations.
Keep work area well lit.
Do not use tools in the presence of flamma-
ble liquids or gases.
3. Guard against electric shock
Avoid body contact with earthed or
grounded surfaces (e.g. pipes, radiators,
ranges, refrigerators).
4. Keep other persons away
Do not let persons, especially children, not
involved in the work touch the tool or the
extension cord and keep them away from
the work area.
5. Store idle tools
When not in use, tools should be stored in
a dry locked-up place, out of reach of
children.
6. Do not force the tool
It will do the job better and safer at the rate
for which it was intended.
7. Use the right tool
Do not force small tools to do the job of a
heavy duty tool.
Do not use tools for purposes not intended;
for example do not use circular saws to cut
tree limbs or logs.
8. Dress properly
Do not wear loose clothing or jewellery,
they can be caught in moving parts.
GB/CY 7