Customer Service - Siemens KI 38 FA 40 Gebrauchsanleitung

en
Fault
Possible cause
Power failure; the fuse
has been switched off;
the mains plug has not
been inserted properly.
The freezer compartment
The temperature in
the fridge is too cold door has not been closed
properly.
The fixed setting has been
The temperature in
set too high or too low
the cool fresh"
(e.g. if there is frost in
compartment is too cold
or too warm. the cool fresh"
compartment).

Customer service

Your local customer service can be found
in the telephone directory or in the
customer service index. Please provide
customer service with the appliance
product number (E no.) and production
number (FD no).
30
Remedial action
Check whether the power is on, check
the fuses.
Close the freezer compartment door; it must
close with a click.
The temperature in the cool fresh"
compartment can be corrected.
To do this, switch off button Fig. 2/1.
Simultaneously press buttons, Fig. 2/1 and
Fig. 2/2, for 1-2 sec. until a flashing 02"
is indicated (release buttons again).
Attention: If buttons are accidentally pressed
for too long, the set temperature in the
fridge will change.
To set the temperature, press the button,
Fig. 2/2, until the required temperature is
displayed (displayed consecutively from 2 °C
to 4 °C. After 4 °C the display switches
to 0 °C).
The set temperature is saved. The display
indicates the actual fridge temperature again
after 1 minute.
This information can be found on the
product label. Fig. r
To prevent unnecessary call outs, please
assist customer service by quoting the
product and production numbers.
This will save you additional costs.