Changing The Display Units Of The Scales; Timer; Display Values Of Timer; Reading Off And Resetting The Processing Time - Bosch MUM5X serie Gebrauchsanleitung

e.g. to the blender attachment or the
ice maker.
→ "Accessories", Page 52
Note: The scales switch off automat-
ically after approx. 3 minutes of in-
activity.
Changing the display units of
the scales
Requirements
¡ The rotary switch is set to
¡ The scales are switched on.
Press and hold
1.
The display unit for the scales
changes.
Symbol
Release both buttons.
2.
a The scales will calibrate them-
selves and restart with the
changed setting.
a The setting is saved.

Timer

Timer
You can read off the processing time
that has elapsed or reset it.

Display values of timer

Observe the following values when
using the timer.
Display range
Display steps
⁠ .
and ⁠ .
Unit
Display in grammes
Display in pounds
0 seconds to
59 minutes and
59 seconds
1 second
Reading off and resetting the
processing time
Set the rotary switch to the re-
1.
quired speed.
a The display shows the processing
time.
To reset the display to "00:00"
2.
press ⁠ .
Notes
¡ If you interrupt processing for less
than 30 seconds, the last values
displayed are saved and will re-
sume if processing starts again.
¡ If you interrupt processing for
more than 30 seconds, the appli-
ance will switch on the scales and
perform calibration.

Cleaning and servicing

Cleaning and servicing
To keep your appliance working effi-
ciently for a long time, it is important
to clean and maintain it carefully.

Dishwasher-safe components

Find out here which components can
be put in the dishwasher.
ATTENTION!
Some parts may be damaged if they
are put in a dishwasher.
Only put dishwasher-safe parts in
▶
the dishwasher.
Only use programmes that do not
▶
heat the water above 60 °C.
Do not wedge plastic parts in the
▶
dishwasher.
Dishwasher-safe:
¡ Bowl lid
¡ Stainless steel mixing bowl
¡ Tools
Timer en
49