Samsung DVD-1080P9 Bedienungsanleitung Seite 12

connections
Connecting to a TV (SCART)
1
Using scart cable, connect to SCART terminal on the rear of
the DVD player to the SCART IN terminals of TV.
2
Turn on the DVD player and TV.
3
Press the input selector on your TV remote control until
the Video signal from the DVD player appears on the TV
screen.
Note
- Noise may be generated if the audio cable is too close to the power cable.
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 14 to 15)
- The number and position of terminals can vary depending on your TV set. Please refer to the user's
manual of the TV.
- Please do not connect Scart and Component Video (Y, Pb, Pr) output simultaneously, as they may inter-
fere and degrade both video output quality.
12_ connections
Scart Cable
Do not use the connection Scart and
Component Video (Y, Pb, Pr) simul-
taneously.