Press the Warm Mist button to
turn on the heating function on
the humidifier. There are three
heat settings to choose from:
Icon
Setting
Low heat. Warm
Mist function has
been turned on.
Medium heat.
High heat.
Turn off Warm
None
Mist function.
NOTE:
• Use caution when setting the warm mist
function; the mist being diffused will be hot.
Turning Off the Display
While the humidifier is operating, the
display will automatically dim itself after 30
seconds. If you want to turn off the display,
press and hold the AUTO button for 3
seconds. To turn the display back on, press
any button (except the power button) on
the control panel.
Action
Press
once.
Press
a
second time.
Press
a
third time.
Press
a
fourth time.
11
Press the AUTO button
to activate the automatic
humidifying mode. The unit
will automatically diffuse
cool mist based on the
surrounding environment and
will maintain environmental
humidity from 55-68% RH (the
unit will run continuously if the
humidity is below 54% RH and
will stop when it reaches 68%
RH). The table below shows
the mist level in correlation to
the relative humidity level for
Auto Mode.
Relative Humidity
< 60% RH
60%-63% RH
64%-67% RH
> 68%RH
NOTE:
• Changing the mist level while on AUTO mode
will cancel the AUTO mode function.
Mist Level
Mist level 3
Mist level 2
Mist level 1
Humidifier
automatically shuts
off.
E N