SECTION 8.4:
RELEASE H–BRACKET
A
Release the two quick clamps.
B
Slide the h-bracket to its
minimum position.
SECTION 8.5:
TRANSFERRING USER INTO MYWAY
There are two scenarios for transferring
the user into the MyWay.
1. Transfer user into MyWay before pedals
are attached (recommended)
2. Transfer user wearing harness in
after pedals have been attached.
(If using this method see Section 8.6
before doing so.)
Support the user to step onto the
pedals. First, connect the harness to
the MyWay. Then secure the user's feet
into the sandals.
Warning - If user is not
capable of sufficient weight
bearing, a hoist should be
used to transfer them into
the MyWay.
A
A
MyWay Pedal User Manual p11
A
B
It's recommended that 2
people assist with transfers.
B